BSP-Yocto-FSL-i.MX8MP-PD21.1.2 2022-02-01 ==================================================== - Linux NXP Vendor Kernel v5.4.70_2.3.2-phy11 (based on NXP tag rel_imx_5.4.70_2.3.2) - U-boot v2020.04_2.3.2-phy9 (based on NXP tag rel_imx_5.4.70_2.3.2) - Yocto 3.0.4 (zeus) Tested Yocto Images: -------------------- - phytec-qt5demo-image: * phyboard-pollux-imx8mp-2 * phyboard-pollux-imx8mp-3 - phytec-vision-image: * phyboard-pollux-imx8mp-2 * phyboard-pollux-imx8mp-3 Build Environment: ------------------ - Ubuntu 20.04 64-bit Features: --------- - Added support for new machine: * phyboard-pollux-imx8mp-3 (phyBOARD-Pollux rev 1552.2) - Added 4GB RAM support - Added support for TPM (phyboard-pollux-imx8mp-3) Fixed Issues: ------------- - Polarity of the backlight enable GPIO for LVDS1 is now set correctly on phyBOARD-Pollux rev 1552.2. Known Issues/Limitations: ------------------------- - Due to PCB layout constraints in PCB revisions until including 1549.2, a RAM frequency of 2 GHz can cause rare instabilities. The instability only shows in hardware variants with 2 GB RAM size. BSP-Yocto-FSL-i.MX8MP-PD21.1.3 sets the RAM frequency to 1.5 GHz to achieve a stable system under all conditions. BSP-Yocto-FSL-i.MX8MP-PD21.1.1 2021-07-12 ==================================================== - Linux NXP Vendor Kernel v5.4.70_2.3.2-phy5 (based on NXP tag rel_imx_5.4.70_2.3.2) - U-boot v2020.04_2.3.2-phy3 (based on NXP tag rel_imx_5.4.70_2.3.2) - Yocto 3.0.4 (zeus) Tested Yocto Images: -------------------- - phytec-qt5demo-image: * phyboard-pollux-imx8mp-2 - phytec-vision-image: * phyboard-pollux-imx8mp-2 Build Environment: ------------------ - Ubuntu 20.04 64-bit Fixes Issues: ------------- - Corrected eMMC boot partition offset for U-Boot to fix RAUC bundle installation - Enable PCA9532 driver support to make LEDs on phyBOARD-Pollux-i.MX8MP working - Fix temperature rates of thermal shutdown during boot time for industrial temperature grade SoCs Known Issues/Limitations: ------------------------- - Display on LVDS1 is not working on phyBOARD-Pollux rev 1552.2 due to an inverted enable GPIO. Will be fixed in release BSP-Yocto-FSL-i.MX8MP-PD21.1.2. BSP-Yocto-FSL-i.MX8MP-PD21.1.0 2021-06-21 ==================================================== - Linux NXP Vendor Kernel v5.4.70_2.3.2-phy3 (based on NXP tag rel_imx_5.4.70_2.3.2) - U-boot v2020.04_2.3.2-phy3 (based on NXP tag rel_imx_5.4.70_2.3.2) - Yocto 3.0.4 (zeus) Tested Yocto Images: -------------------- - phytec-qt5demo-image: * phyboard-pollux-imx8mp-2 - phytec-vision-image: * phyboard-pollux-imx8mp-2 Build Environment: ------------------ - Ubuntu 20.04 64-bit Features: --------- - Added new features (on machine phyboard-pollux-imx8mp-2): * PEB-WLBT-05 WLAN BT support (kernel) * PEB-AV-10 support LVDS Display and Audio (kernel) * VM-016 on second CSI port * Update gstreamer examples * RAUC support * QSPI support (bootloader/kernel) * USB Host support (bootloader) * M7 support Known Issues/Limitations: ------------------------- - RAUC bundle installation is broken. Will be fixed in release BSP-Yocto-FSL-i.MX8MP-PD21.1.1 BSP-Yocto-FSL-i.MX8MP-ALPHA2 2021-03-12 ================================================== - Linux NXP Vendor Kernel v5.4.70_2.3.0-phy5 (based on NXP tag rel_imx_5.4.70_2.3.0) - U-boot v2020.04_2.3.0-phy3 (based on NXP tag rel_imx_5.4.70_2.3.0) - Yocto 3.0.4 (zeus) NOTE: This is an ALPHA release and has not been tested for full functionality. It is possible that some features are not working correct or stable. Tested Yocto Images: -------------------- - phytec-qt5demo-image: * phyboard-pollux-imx8mp-1 * phyboard-pollux-imx8mp-2 - phytec-vision-image: * phyboard-pollux-imx8mp-2 Build Environment: ------------------ - Ubuntu 16.04 64-bit Features: --------- - Added support for new machine: * phyboard-pollux-imx8mp-2 - Booting from EMMC and SD-Card is supported - Added new features (on machine phyboard-pollux-imx8mp-2): * PEB-WLBT-05 WLAN support (kernel) * mini PCIe (kernel) * FEC Ethernet (bootloader/kernel) * RS232 and RS485 support (kernel) * PEB-AV-10 support LVDS Display and Audio (only playback) (kernel) * CAN FD - Added new features (both machines): * gstreamer examples Known Issues/Limitations: ------------------------- - PEB-AV-10 colours are wrong BSP-Yocto-FSL-i.MX8MP-ALPHA1 2020-10-30 ================================================== - Linux NXP Vendor Kernel v5.4.47_2.2.0-phy2 (based on NXP tag rel_imx_5.4.47_2.2.0) - U-boot v2020.04_2.2.0-phy2 (based on NXP tag rel_imx_5.4.47_2.2.0) - Yocto 3.0.4 (zeus) NOTE: This is an ALPHA release and has not been tested for full functionality. It is possible that some features are not working correct or stable. Tested Yocto Images: -------------------- - phytec-qt5demo-image: * phyboard-pollux-imx8mp-1 Build Environment: ------------------ - Ubuntu 16.04 64-bit Features: --------- - Added support for new machine: * phyboard-pollux-imx8mp-1 - Booting from EMMC and SD-Card is supported - Added new features: * EEPROM support (u-boot/kernel) * 2x USB 3.0 host support (kernel) * EQOS Ethernet 1 GBit (u-boot-imx/kernel) * SD-card support (u-boot-imx/kernel) * Support for RTC (kernel) * display support with LVDS1 (kernel) * HDMI (kernel) * SPI NOR flash (no booting possible) * GPU + VPU (kernel) * temperatur sensors on module (kernel) * debug UART over USB (bootloader/kernel) * VM-016 camera support on CSI1 interface (kernel) Known Issues/Limitations: ------------------------- - CAN FD is working but connector pin out is wrong Changelog of Release Notes -------------------------- 2020-10-30 - initial version